There must be an easy way to do this, but I haven’t found it. I have two mono tracks, recorded on iPhones on the left and on the right, and they are in a single Amadeus document. I would like to create a stereo document, with the left track in the left channel and the right track in the right channel.
I have a kludgy workaround, but I would be happy if someone could point me to an easier way.
-Norm Loomer=
Two mono tracks --> stereo channels?
Moderator: Martin Hairer
- Martin Hairer
- Site Admin
- Posts: 1976
- Joined: Wed Nov 08, 2006 11:49 am
- Contact:
Two mono tracks --> stereo channels?
See Tracks -> Merge With Next / Previous Track
Do make sure that playback is set to "front left" for the left channel
and "front right" for the right channel beforehand. Regards,
Martin
--
HairerSoft
http://www.hairersoft.com/
Do make sure that playback is set to "front left" for the left channel
and "front right" for the right channel beforehand. Regards,
Martin
--
HairerSoft
http://www.hairersoft.com/
-
- Posts: 17
- Joined: Sat Nov 11, 2006 2:45 am
Two mono tracks --> stereo channels?
That was easy, just as I had hoped. Thank you, Chuck and Martin!
-Norm Loomer
-Norm Loomer
On Oct 24, 2017, at 2:31 PM, Martin Hairer <martin@hairersoft.com> wrote:
See Tracks -> Merge With Next / Previous Track
Do make sure that playback is set to "front left" for the left channel
and "front right" for the right channel beforehand. Regards,
Martin
--
HairerSoft
http://www.hairersoft.com/