AP v2.0 Bug - Suppress Noise

Discussion forum for Amadeus users

Moderator: Martin Hairer

mrboma
Posts: 11
Joined: Thu Jun 16, 2011 12:04 am

Post by mrboma »

I did a little more experimenting, and I have found that the problem only occurs when using both 32 bit and 1024 samples. If I use 24 bit and 1024 samples, it is fine. If I use 32 bit and 512 samples it is fine. A separate problem is that it doesn't record at all above 1024 samples, no matter what bit rate I choose. My interface outputs at 96000 Hz, so that is what I am using for all of these tests. I uploaded before and after files so you can hear what is going on (you have to turn the volume up very high to hear the detail).

This is the pre-processed file: https://files.me.com/mrboma/sw4a2c

And this is after running the noise suppression filter: https://files.me.com/mrboma/9q03gg

The password for both files is: amadeus

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

AP v2.0 Bug - Suppress Noise

Post by Martin Hairer »

Great, thanks, I'll check on that. Regards,

Martin

HairerSoft
http://www.hairersoft.com/



_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

Post Reply