AUMatrix Reverb suddenly un-cooperative

Discussion forum for Amadeus users

Moderator: Martin Hairer

Post Reply
nikohfb
Posts: 3
Joined: Wed Jan 27, 2010 8:56 am
Location: Frankfurt am Main, Germany

AUMatrix Reverb suddenly un-cooperative

Post by nikohfb »

Since yesterday, whenever I try using the Apple Matrix Reverb, all I get is the following:

Amadeus Pro Alert: Problems interacting with the Audio Unit. It may be corrupted.

I have not - at least to my knowledge - made any changes whatsoever to my system configuration, and up to now everything AU-related has worked without any hitches (apart from my previous post's niggling point re the closing of effect windows).

Other AUs work fine in Amadeus (Apple, mda, Expert Sleepers), while other plug-in hosts (Rax, Numerology) have no problem with AUMatrixReverb, so it cannot be *that* corrupted ...

What should I do?

Best wishes - Nikolaus

I'm running 10.6.2 on a late 2006 2 GHz Intel Core 2 Duo iMac with 2 GB of RAM

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

AUMatrix Reverb suddenly un-cooperative

Post by Martin Hairer »

Dear Nikolaus, this can happen if you try to apply it to a mono sound. The matrix reverb AU requires the input to be stereo... (Yes, I know that the error message needs improvement; it is a generic message, but in this particular case the cause could have been determined by the software.) Regards,

Martin

HairerSoft
http://www.hairersoft.com/


_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

nikohfb
Posts: 3
Joined: Wed Jan 27, 2010 8:56 am
Location: Frankfurt am Main, Germany

Post by nikohfb »

Dear Martin - thanks a lot. This did the trick!

Best - Niko

Post Reply