1. recorded 4-track.
2. split into individual channels
3. top channel shows wave form, but can get no playback. Other three channels are fine. Have I uncovered a bug?
Version 1.45 (688)
Related: Varying volume for each channel ... is moving the volume line the only way to go about it? Assuming here the volume control on each channel is for playback volume, not the amplitude of the track. Right?
multitrack editing -- possible bug and channel levels
Moderator: Martin Hairer
-
- Posts: 5
- Joined: Sat Nov 21, 2009 1:22 am
-
- Posts: 5
- Joined: Sat Nov 21, 2009 1:22 am
additional information:
--this is repeatable; occurs only on the topmost track. You can witness it by starting playback and unchecking the "play" boxes on the bottom tracks. When there is nothing checked but the topmost track, there is no sound.
-You seem to be able to clear the problem if you check the play box on the the top track, have no other tracks checked, and then select the bottom-most track.
--this is repeatable; occurs only on the topmost track. You can witness it by starting playback and unchecking the "play" boxes on the bottom tracks. When there is nothing checked but the topmost track, there is no sound.
-You seem to be able to clear the problem if you check the play box on the the top track, have no other tracks checked, and then select the bottom-most track.