Amadeus Pro version 1.5.5 and Lion

Discussion forum for Amadeus users

Moderator: Martin Hairer

mirsky
Posts: 1
Joined: Sat Jul 02, 2011 11:12 pm

Amadeus Pro version 1.5.5 and Lion

Post by mirsky »

Does anyone know whether Amadeus version 1.5.5 will work in Lion?

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by Martin Hairer »

Does anyone know whether Amadeus version 1.5.5 will work in Lion?
Works fine on the current Developer Preview. Regards,

Martin

HairerSoft
http://www.hairersoft.com/


_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by Martin Hairer »

Oh good! Now let's hope apple does not break things when the release comes out. lol!
I doubt it. If they did, I would just build a small bugfix version and release it as
version 1.5.6. Regards,

Martin

HairerSoft
http://www.hairersoft.com/


_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

Where on earth can I get 1.5.5?, I'm still on 1.5.1 and if I check for 'updates' I get taken to upgrades as in the new AP2, but I'm happy with 1.5, thanks.

User avatar
dinojrx
Posts: 79
Joined: Wed Nov 11, 2009 9:18 am
Location: Berlin / Germany
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by dinojrx »

Have a simple look on the website and there on the faqs.

Am 19/07/2011 um 23:08 schrieb soundchaser:
Where on earth can I get 1.5.5?, I'm still on 1.5.1 and if I check for 'updates' I get taken to upgrades as in the new AP2, but I'm happy with 1.5, thanks.




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list


--
------------------------------------------------------
Als Yoda noch ganz klein war:
Yoda: "Die andere Seite, dunkel sie ist..."
Yodas Mutter: "Na und? Deinen Toast Du trotzdem isst!"
------------------------------------------------------


_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

I'm using v1.5.5 with Lion and I get crashes when I get to 'split according to markers', which I never used to :(

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by Martin Hairer »

Could you please send me the crash report to Martin@HairerSoft.com ?
Thanks,

Martin

--
HairerSoft
http://www.hairersoft.com/




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

Done, I think, I hope.

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

Was ok for a while, now it's started crashing again, just when I finish digitising vinyl and click on 'save as' Amadeus 1.5.5 disappears. The crash report suggests I go to my trash and 'import as raw data' and the manual says ensure the Header Size field is set to zero and the sample rate is correct. If that's the info on the bottom left corner of the pane it showed 24Bit/44.1 though I captured it as 24/96.

I'm not sure what to do with the raw data now, am I supposed to convert it?

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by Martin Hairer »

If that's the info on the bottom left corner of the pane it showed 24Bit/44.1 though I captured it as 24/96.
Then you should change this to 24/96 before importing to get it right...
Regards,

Martin

--
HairerSoft
http://www.hairersoft.com/




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

Before importing the vinyl? I always do. Another file I did at the same time that didn't crash when I saved it remained at 24/96.

If you mean before importing raw data, how do I do that and what do I do after importing?

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by Martin Hairer »

If you mean before importing raw data,
Yes, that's what I meant.
how do I do that and what do I do after importing?
Just change it in the import dialog. If you already imported it and trashed the raw data file, then you can still change the sample rate by clicking on the bottom left of the sound window, changing the rate to 96 kHz and check the "don't resample" flag. Regards,

Martin

--
HairerSoft
http://www.hairersoft.com/




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

OK, the original whole album file is now split into three temp files in this case 4, 5 and 6, how do I paste them together so there is no cut off mid-song?
Thanks.

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Amadeus Pro version 1.5.5 and Lion

Post by Martin Hairer »

OK, the original whole album file is now split into three temp files in this case 4, 5 and 6, how do I paste them together so there is no cut off mid-song?
Just copy / paste, but turn off smart editing first in the "Edit" menu.
Regards,

Martin

--
HairerSoft
http://www.hairersoft.com/




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

soundchaser
Posts: 13
Joined: Tue Sep 08, 2009 7:26 pm

Post by soundchaser »

I still can't find a copy/paste option.
:oops:

The crashes are still happening, as soon as I click 'save as' the beach ball appears then Amadeus disappears.

Does Amadeus 2 suffer from this problem?

Post Reply