How to edit L & R tracks separately?

Discussion forum for Amadeus users

Moderator: Martin Hairer

Post Reply
xgman
Posts: 4
Joined: Wed Dec 02, 2009 5:54 pm

How to edit L & R tracks separately?

Post by xgman »

In Adobe Audition and Sony Soundforge you can select sections or all of each L or R sterio track via the up/down arrow keys and edit either L or R separately without affecting the other channel. This is use full if you have a noisy bit on one side of the sterio mix for instance and want to edit or copy the part of the other channel for that section over top of the other channel to iliminate the problem on that side of the mix. In any case I don't see any way to do this easily in Amadeus. It is a simple matter of up or down arrow select and edit on these other programs. Is therre any way to do this here? if not I would suggest for a future update. Thanks.

Gerard Bik
Posts: 353
Joined: Fri Nov 10, 2006 9:04 pm

How to edit L & R tracks separately?

Post by Gerard Bik »

Move the cursor to the top middle or bottom of a stereo track and watch the little L or R appear.
That's where you drag to select left, right or both tracks. Or play back just L or R.


In Adobe Audition and Sony Soundforge you can select sections or all of each L or R sterio track via the up/down arrow keys and edit either L or R separately without affecting the other channel. This is use full if you have a noisy bit on one side of the sterio mix for instance and want to edit or copy the part of the other channel for that section over top of the other channel to iliminate the problem on that side of the mix. In any case I don't see any way to do this easily in Amadeus. It is a simple matter of up or down arrow select and edit on these other programs. Is therre any way to do this here? if not I would suggest for a future update. Thanks.




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
--
______________________ _
Gerard Bik grafische vormgeving
Van Aerssenstraat 263
2582 JM Den Haag
070 3554081
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

Ron Fleckner
Posts: 41
Joined: Tue Jan 22, 2008 1:59 am
Location: Melbourne Australia

How to edit L & R tracks separately?

Post by Ron Fleckner »

On 03/12/2009, at 5:00 AM, xgman wrote:
In Adobe Audition and Sony Soundforge you can select sections or all
of each L or R sterio track via the up/down arrow keys and edit
either L or R separately without affecting the other channel. This
is use full if you have a noisy bit on one side of the sterio mix
for instance and want to edit or copy the part of the other channel
for that section over top of the other channel to iliminate the
problem on that side of the mix. In any case I don't see any way to
do this easily in Amadeus. It is a simple matter of up or down
arrow select and edit on these other programs. Is therre any way to
do this here? if not I would suggest for a future update. Thanks.
Amadeus does exactly this. Up arrow, shift right arrow selects a
portion of the upper (left) channel, and down arrow does the same for
the lower (right) channel.

Ron
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

xgman
Posts: 4
Joined: Wed Dec 02, 2009 5:54 pm

Post by xgman »

Thanks, now I see how it is done. Didn't see the little L & R at first.

Post Reply