Cannot save "selectiion as"
Moderator: Martin Hairer
-
- Posts: 1
- Joined: Mon Oct 26, 2009 4:55 pm
Cannot save "selectiion as"
After latest up date :
After marking selection and trying to "Save Selection As" I get this error code :
.*** -[NSCFDictionary setObject:forKey:]: mutating method sent to immutable object
I can work around but it is a nuisance.
After marking selection and trying to "Save Selection As" I get this error code :
.*** -[NSCFDictionary setObject:forKey:]: mutating method sent to immutable object
I can work around but it is a nuisance.
- Martin Hairer
- Site Admin
- Posts: 1978
- Joined: Wed Nov 08, 2006 11:49 am
- Contact:
Cannot save "selectiion as"
Oops that's a really silly one, no idea how it made it through to theAfter marking selection and trying to "Save Selection As" I get this
error code :
.*** -[NSCFDictionary setObject:forKey:]: mutating method sent to
immutable object
final build I just rebuilt the application and updated the
archives. If you redownload it from <http://www.hairersoft.com/AmadeusPro/Am ... nload.html
The updated build should show as 1.4.4 (638) in the "About Amadeusyou should be fine.
Pro" dialog.
Regards,
Martin
HairerSoft
http://www.hairersoft.com/
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
-
- Posts: 18
- Joined: Sun Feb 25, 2007 7:34 pm
- Location: Houston, TX
- Contact:
- Martin Hairer
- Site Admin
- Posts: 1978
- Joined: Wed Nov 08, 2006 11:49 am
- Contact:
Cannot save "selectiion as"
Yes, it's 643 indeed The thing is that the same bug appeared inYou mean the old build was 638, the new one is 643, right?
both the "Save Selection As" and the "Split According to Markers"
function. I realised this very shortly after after I uploaded build
638, that's why the build number changed. Sorry for that....
Martin
HairerSoft
http://www.hairersoft.com/
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
-
- Posts: 3
- Joined: Wed Oct 28, 2009 6:42 pm
- Contact:
Can't save
I just updated my Amadeus Pro. Now I can't save any tracks. I try "save as" and "save" and get an error that says "LAME returned the following error: " and then nothing after that.
I don't do anything fancy with this. I just record an MP3 voice and email it to my clients. I do not code stuff, and I don't know how to insert a "patch".
Please let me know. Thanks.
I don't do anything fancy with this. I just record an MP3 voice and email it to my clients. I do not code stuff, and I don't know how to insert a "patch".
Please let me know. Thanks.
- Martin Hairer
- Site Admin
- Posts: 1978
- Joined: Wed Nov 08, 2006 11:49 am
- Contact:
Cannot save "selectiion as"
What are the characteristics (sampling rate, number of channels) ofI just updated my Amadeus Pro. Now I can't save any tracks. I try
"save as" and "save" and get an error that says "LAME returned the
following error: " and then nothing after that.
the sound you are trying to save? Also, which version of MacOS X are
you using? Finally, could you send me a screenshot of the Mp3 settings
dialog (click on "Settings" in the file savings dialog), including the
"advanced" settings? Thanks,
Martin
HairerSoft
http://www.hairersoft.com/
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
-
- Posts: 3
- Joined: Wed Oct 28, 2009 6:42 pm
- Contact:
Still can't save
Hi. Thanks for the reply.
To be honest, I haven't changed anything. I am using the defaults, as far as I can tell.
On the MP3 settings, we have:
Encoding type: CBR
Encoding quality 2
Bitrate 128
VBR quality (not highlighted, cannot seem to change, set at 4)
Tags: none
Sample rate: Automatic
box "joint stereo" is checked
Using LAME encoding engine
When I click "Advanced" I see one highlighted box "Additional command-line arguments" which is unchecked. Other box (overrides all other settings) is gray and cannot change, box is unchecked.
I am using OX 10.4.11
As for "sampling rate" and "number of channels" I'm not sure how to check. As I say, previous to updating, I just clicked on record, recorded my own voice--nothing else--and then saved as an MP3 file, and emailed to my clients. I changed nothing, and I do nothing fancy with this application at all (I hope to learn--but not today!).
I hope this helps. Sorry to be so L.A.M.E. (a little humor there....)
Thanks.
To be honest, I haven't changed anything. I am using the defaults, as far as I can tell.
On the MP3 settings, we have:
Encoding type: CBR
Encoding quality 2
Bitrate 128
VBR quality (not highlighted, cannot seem to change, set at 4)
Tags: none
Sample rate: Automatic
box "joint stereo" is checked
Using LAME encoding engine
When I click "Advanced" I see one highlighted box "Additional command-line arguments" which is unchecked. Other box (overrides all other settings) is gray and cannot change, box is unchecked.
I am using OX 10.4.11
As for "sampling rate" and "number of channels" I'm not sure how to check. As I say, previous to updating, I just clicked on record, recorded my own voice--nothing else--and then saved as an MP3 file, and emailed to my clients. I changed nothing, and I do nothing fancy with this application at all (I hope to learn--but not today!).
I hope this helps. Sorry to be so L.A.M.E. (a little humor there....)
Thanks.
-
- Posts: 3
- Joined: Wed Oct 28, 2009 6:42 pm
- Contact:
More on "cannot save"
Hi again.
I figured out the answers to the other questions.
Each recording is generally less than 5 minutes long.
No. of tracks: 1
Sampling rate: 44,100 HZ
Sampling depth: 16 bits
Hope this helps.
Thanks!
I figured out the answers to the other questions.
Each recording is generally less than 5 minutes long.
No. of tracks: 1
Sampling rate: 44,100 HZ
Sampling depth: 16 bits
Hope this helps.
Thanks!
- Martin Hairer
- Site Admin
- Posts: 1978
- Joined: Wed Nov 08, 2006 11:49 am
- Contact:
Cannot save "selectiion as"
Maybe that's the problem. I *thought* that the current build of lameI am using OX 10.4.11
runs on 10.4, but maybe I was wrong. I'll check that sometime either
tomorrow or over the weekend. Regards,
Martin
HairerSoft
http://www.hairersoft.com/
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
-
- Posts: 3
- Joined: Sat Nov 07, 2009 9:37 am
- Location: San Francisco, CA