Adjusting fade length in batch process

Discussion forum for Amadeus users

Moderator: Martin Hairer

Post Reply
matlockdown
Posts: 2
Joined: Wed Jun 26, 2019 9:55 am

Adjusting fade length in batch process

Post by matlockdown »

Hi,
I want to batch process hundreds of files to reach zero amplitude at the beginning and end of each file to eliminate digital click.
Amadeus has the fade batch convert but it wont let me set the fade length and just adds a huge radio style fade on the start and end!
I've tried enbtering the fade value in the effects drop down (to 0.01s) but this has no effect on the batch converted file.

I tried a tip using amplify where the fade can be set but this didnt do anything at all.

Any advice would be greatfully received

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Adjusting fade length in batch process

Post by Martin Hairer »

Hi, you probably want to precede the fading action by a suitable "Set Selection" action.
Regards,

Martin

--
HairerSoft
http://www.hairersoft.com/

matlockdown
Posts: 2
Joined: Wed Jun 26, 2019 9:55 am

Post by matlockdown »

Yes! I figured out exactly that after a few hours and it worked perfectly 👍

Many Thanks

Post Reply