Now I suppose these are bugs, but I just stumbled upon them, so
I can't tell for sure how long they've been there:
1. When generating a waveform into a document, the duration is wrong for any samplerate other than 44.1 KHz. 300 seconds of 440 Hz: 44.1 KHz: 5 minutes. 48 KHz: 04:35.625. 96 KHz: 02:17.812. Oh, and 6 KHz: 36:45.000. I strongly suggest that the generated number of samples should increase and decrease with the samplerate.
2. Increasing the max frequency for the Real-Time Sonogram from 11025 to 22050 Hz "mutes" the input - there's just "whitespace" inserted until the frequency is brought back down again to 11025 or lower.
3. Edit presets for the Real-Time Sonogram gives exception "NSCFDictionary setObject:forKey: attempt to insert nil value".
(3. makes me believe that 2. is not so much a bug as a "not-implemented-yet-feature".)
That's what I've found so far - other than this it's rockin'.
A couple of bugs in 1.4.2
Moderator: Martin Hairer
- Martin Hairer
- Site Admin
- Posts: 1976
- Joined: Wed Nov 08, 2006 11:49 am
- Contact:
A couple of bugs in 1.4.2
Version 1.4.3 (joust released should fix 2 and 3). I haven't had time1. When generating a waveform into a document, the duration is wrong
for any samplerate other than 44.1 KHz. 300 seconds of 440 Hz: 44.1
KHz: 5 minutes. 48 KHz: 04:35.625. 96 KHz: 02:17.812. Oh, and 6 KHz:
36:45.000. I strongly suggest that the generated number of samples
should increase and decrease with the samplerate.
2. Increasing the max frequency for the Real-Time Sonogram from
11025 to 22050 Hz "mutes" the input - there's just "whitespace"
inserted until the frequency is brought back down again to 11025 or
lower.
3. Edit presets for the Real-Time Sonogram gives exception
"NSCFDictionary setObject:forKey: attempt to insert nil value".
to fix 1, but this should of course be trivial. Strange, this bug must
have been around literally for years and nobody ever noticed it...
Thanks,
Martin
HairerSoft
http://www.hairersoft.com/
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list