Two mono tracks --> stereo channels?

Discussion forum for Amadeus users

Moderator: Martin Hairer

Post Reply
normloomer
Posts: 17
Joined: Sat Nov 11, 2006 2:45 am

Two mono tracks --> stereo channels?

Post by normloomer »

There must be an easy way to do this, but I haven’t found it. I have two mono tracks, recorded on iPhones on the left and on the right, and they are in a single Amadeus document. I would like to create a stereo document, with the left track in the left channel and the right track in the right channel.

I have a kludgy workaround, but I would be happy if someone could point me to an easier way.

-Norm Loomer=

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Two mono tracks --> stereo channels?

Post by Martin Hairer »

See Tracks -> Merge With Next / Previous Track

Do make sure that playback is set to "front left" for the left channel
and "front right" for the right channel beforehand. Regards,

Martin

--
HairerSoft
http://www.hairersoft.com/

normloomer
Posts: 17
Joined: Sat Nov 11, 2006 2:45 am

Two mono tracks --> stereo channels?

Post by normloomer »

That was easy, just as I had hoped. Thank you, Chuck and Martin!

-Norm Loomer


On Oct 24, 2017, at 2:31 PM, Martin Hairer <martin@hairersoft.com> wrote:

See Tracks -> Merge With Next / Previous Track

Do make sure that playback is set to "front left" for the left channel
and "front right" for the right channel beforehand. Regards,

Martin

--
HairerSoft
http://www.hairersoft.com/


Post Reply