Mailing ListMailing List   FAQFAQ   SearchSearch   MemberlistMemberlist   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

"Burn to CD" problem

 
Post new topic   Reply to topic    www.hairersoft.com Forum Index -> Discussion
View previous topic :: View next topic  
Author Message
CP Heaton
Guest





PostPosted: Wed May 21, 2014 9:55 pm    Post subject: "Burn to CD" problem Reply with quote

I first reported this situation in 2007, and it has continued for
some years, through numerous versions of AP. When in the course of
normal events I go to Sound>Burn to CD, I invariably get a permanent
"Waiting for drive..." message. I have to Quit AP, Restart, Open
Recent..., and if I immediately try to burn to CD with no
intermediate moves, I get Ready to Burn option. But can't burn
another one. Have to go through same Quit, Restart, etc. procedure.

I feel fortunate to be able to burn at all. For a long time I was
unable, until somebody on here let me know that quitting and
restarting might work.

Suggestions for uneventful consistent burning would be appreciated. thanks.

CP

iMac Intel System 10.6.8, Amadeus Pro 2.1.4.
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
Back to top
JEGG



Joined: 24 Feb 2007
Posts: 121

PostPosted: Thu May 22, 2014 4:39 pm    Post subject: Reply with quote

Hello:
I've used AP since I've had a G3, now I have the very first Intel offered (that was 2006!) and run 10.6.8. I've not having any problems - but that doesn't help you.

The messages you are getting say "Waiting for Drive" and not "Waiting for Disc"?

Have you burned data CD's in the finder, and if so, has that gone smoothly? If you haven't done so, you might try burning two consecutive discs to see what happens.

Once you relaunch Amadeus and are able to burn a disc, do you make sure that AP has not left an alias (icon) for the disc you have ejected before trying to burn again?

Have you done a very thorough search for anything Amadeus related on your drive like preferances, etc. (perhaps using something like EasyFind) and deleted it? And if that doesn't work, doing the same thing and deleting the application as well? And doing a lot of maintenance in between (see below). Then reinstalling. (I don't recall Amadeus leaving much around on a drive, though - but using EasyFind is more straightforward and reliable than the search function. YMMV)

You've no doubt repaired permissions? And verified your drive?

Have you used something like Onyx to scour for caches of all kinds (even things like font caches) and reset audio units, etc.? Be sure to go through the non-automated options as well.

Sometimes things unrelated (and completely so) to the application cause problems, hence a very aggressive use of Onyx can help.

If you find a solution to your problem I would be interested in knowing what it was.

**And you do know to write Martin directly - not using a contact function on the forum - to get advice for this sort of thing?

Good luck, and again, let us know what you find.
Back to top
View user's profile Send private message
CP Heaton
Guest





PostPosted: Fri May 23, 2014 1:15 am    Post subject: "Burn to CD" problem Reply with quote

Hello

"Waiting for the drive" is the message. I have repaired permissions
& verified drive. No alias (icon) left over.

I will try other steps as and if I can. Thanks.

CP



Quote:
Hello:
I've used AP since I've had a G3, now I have the very first Intel
offered (that was 2006!) and run 10.6.8. I've not having any
problems - but that doesn't help you.

The messages you are getting say "Waiting for Drive" and not
"Waiting for Disc"?

Once you relaunch Amadeus and are able to burn a disc, do you make
sure that AP has not left an alias (icon) for the disc you have
ejected before trying to burn again?

Have you done a very thorough search for anything Amadeus related on
your drive like preferances, etd. (perhaps using something like
EasyFind) and deleted it? And if that doesn't work, doing the same
thing and deleting the application as well? And doing a lot of
maintenance in between (see below). Then reinstalling.

You've no doubt repaired permissions? And verified your drive?

Have you used something like Onyx to scour for caches of all kinds
(even things like font caches) and reset audio units, etc.? Be sure
to go through the non-automated options as well.

Sometimes things unrelated (and completely so) to the application
cause problems, hence a very aggressive use of Onyx can help.

If you find a solution to your problem I would be interested in
knowing what it was.

And you do know to write Martin directly - not using a contact
function on the forum - to get advice for this sort of thing?

Good luck, and again, let us know what you find.




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at
http://two.pairlist.net/mailman/listinfo/forum_list

_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
Back to top
Display posts from previous:   
Post new topic   Reply to topic    www.hairersoft.com Forum Index -> Discussion All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group