No Sound (Silence) when using Soundflower with Amadeus Pro

Discussion forum for Amadeus users

Moderator: Martin Hairer

Post Reply
mbdrums
Posts: 30
Joined: Wed Jan 30, 2013 3:02 pm
Location: Philadelphia Area
Contact:

No Sound (Silence) when using Soundflower with Amadeus Pro

Post by mbdrums »

Hey Martin,

I took your advice and downloaded the lastest version of Soundflower for Mac OS X 10.7.5 and tried some test recordings using Amadeus Pro ... here were the results:

1) Successfully recorded a Spotify track - activity shown in the Recording Meter and waveform shown in display ... but no audio/sound that I could monitor as it recorded.
2) Also no sound on Playback. I tried switching Sound Devices during Playback and still no sound. The Playback Controller showed activity, but no sound.
3) Tried recording a track of the [metronome] App - TapNTempo (using Soundflower), but nothing happened at all ... no waveform and no activity in the meter. Also tried switching Sound Devices, but nothing. When I click off of Amadeus Pro and just switch to "Internal Speakers" - I hear the TapNTempo "Click" perfectly!

HELP!!!

Many thanks, Martin!

Mark
Official Voting Member - The GRAMMYs
Professor of Music/Percussion - Drexel University
President - National Association of Rudimental Drummers (N.A.R.D)

User avatar
dinojrx
Posts: 79
Joined: Wed Nov 11, 2009 9:18 am
Location: Berlin / Germany
Contact:

No crosspostings please

Post by dinojrx »

Have a look in the original thread

William S/MA
Posts: 20
Joined: Fri Nov 10, 2006 9:29 pm
Location: Dartmouth MA USA

Post by William S/MA »

Soundflower works great for me. I am running OS 10.6 on a core 2 duo. The steps I follow are as follows:
1. Go to sys prefs > Sound out and select 2 channel Soundflower
2. Go to Amadeus prefs > sound in and select 2 channel soundflower and sound out select ear or line out
3. In Amadeus select new sound, then record, then check playthrough.
4. Start Amadeus recording then start other program playback.

I am usually recording from Safari but it works for other sources also.
Did you miss a step?

William S/MA

Post Reply