Possible 1.4.4 snag ?

Discussion forum for Amadeus users

Moderator: Martin Hairer

Post Reply
saral3
Posts: 2
Joined: Tue Oct 27, 2009 4:14 pm
Location: Camp Hill, PA

Possible 1.4.4 snag ?

Post by saral3 »

I just updated to 1.4.4 and when I try to split according to markers it gives me this error An exception was raised *** -[NSCFDictionary setObject:forKey:]: mutating method sent to immutable object
any help?

saral3
Posts: 2
Joined: Tue Oct 27, 2009 4:14 pm
Location: Camp Hill, PA

Fixed

Post by saral3 »

just saw a past subject with the save as problem...got 1.4.4 (643) and now is working

Ingvar Loco Nordin
Posts: 9
Joined: Sat Sep 22, 2007 1:08 pm
Location: Sweden
Contact:

Re: Possible 1.4.4 snag ?

Post by Ingvar Loco Nordin »

saral3 wrote:I just updated to 1.4.4 and when I try to split according to markers it gives me this error An exception was raised *** -[NSCFDictionary setObject:forKey:]: mutating method sent to immutable object
any help?
I downloaded 1.4.4., but found my filters - like Mike Norris' filters and the Apple filters - don't work. They're ok when previewing, but just garbage when applied. I got the former Amadeus Pro from TimeMachine, and that works as usual - BUT there IS something the matter with 1.4.4. Don't load it until the problem is fixed!

/Ingvar Loco Nordin
All Times Are Now, All Places Are Here

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Possible 1.4.4 snag ?

Post by Martin Hairer »

I downloaded 1.4.4., but found my filters - like Mike Norris'
filters and the Apple filters - don't work.
I just tried both Apple's AUGraphicEQ and Mike Norris' Chorus filter
and both worked fine for me. What are the characteristics (sample
rate, number of channels) of the sound on which you tried to apply
them? Regards,

Martin

HairerSoft
http://www.hairersoft.com/



_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

jpandrews
Posts: 1
Joined: Wed Oct 28, 2009 1:52 am

Post by jpandrews »

I'm afraid that I, too, am seeing bizarre behavior with Audio Units. The files I'm attempting to work with are mono linear .amad 16 bit 44.1 k files that had been converted from 128 kbps 44.1 k .wma files.

AUDynamicsProcessor and AUPeak Limiter behave properly in preview, but do not significantly change the audio when applied. AUHipass previews fine, but appears to apply as a low pass filter(!). (Ironically, AULowpass seems to work OK.) Bias SoundSoap Pro 2 broadband mode does not preview or apply the expected level of noise reduction.

(Martin may recall that) I upgraded from 1.4.3 to 1.4.4 Monday night and discovered that 1.4.4 wouldn't open .wma files. I restored 1.4.3 by moving it from the trash to the Applications folder and found that I could open .wma files but that SoundSoap Pro 2 seemed to perform marginally. Tuesday afternoon I installed a newly downloaded copy of 1.4.4 (apparently a new build) and can now open .wma files, but cannot use the effects properly.

I will reinstall 1.4.3 from a TM backup to finish my work tonight, but I'm worried that some 'background' support files for AP may have been confused or compromised by the ugrade/downgrade/upgrade/downgrade.
-jpa

Ingvar Loco Nordin
Posts: 9
Joined: Sat Sep 22, 2007 1:08 pm
Location: Sweden
Contact:

1.4.4. problem

Post by Ingvar Loco Nordin »

jpandrews wrote:I'm afraid that I, too, am seeing bizarre behavior with Audio Units. The files I'm attempting to work with are mono linear .amad 16 bit 44.1 k files that had been converted from 128 kbps 44.1 k .wma files.

AUDynamicsProcessor and AUPeak Limiter behave properly in preview, but do not significantly change the audio when applied. AUHipass previews fine, but appears to apply as a low pass filter(!). (Ironically, AULowpass seems to work OK.) Bias SoundSoap Pro 2 broadband mode does not preview or apply the expected level of noise reduction.


ugrade/downgrade/upgrade/downgrade.
Hi again! I got confirmation from the company that there is something wrong with the filters when applied. They will fix it shortly.
All Times Are Now, All Places Are Here

clove23
Posts: 5
Joined: Thu Apr 05, 2007 2:49 am

Post by clove23 »

ahh..good. Sent Martin an email..but glad to notice it is not just me. None of my AU plugs will apply the effect. I did have success using VST versions as a workaround.

User avatar
Martin Hairer
Site Admin
Posts: 1975
Joined: Wed Nov 08, 2006 11:49 am
Contact:

Possible 1.4.4 snag ?

Post by Martin Hairer »

Hi, the version at <http://www.hairersoft.com/Downloads/
AmadeusPro.zip> includes a hopefully permanent fix for the Audio Units
problems. The whole back-end was rewritten from scratch, ditching all
of the old difficult to maintain Amadeus II code that was still
hanging around. If all goes as planned, this will be released as
version 1.4.5 sometime next week. Sorry again for the problems.
Regards,

Martin

HairerSoft
http://www.hairersoft.com/


_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

luv4acting
Posts: 2
Joined: Wed Nov 04, 2009 5:13 pm

Post by luv4acting »

The link doesn't work.....

Repost please

Gerard Bik
Posts: 353
Joined: Fri Nov 10, 2006 9:04 pm

Possible 1.4.4 snag ?

Post by Gerard Bik »

Still works for me (?)

The link doesn't work.....

Repost please




_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list
--
______________________ _
Gerard Bik grafische vormgeving
Van Aerssenstraat 263
2582 JM Den Haag
070 3554081
_______________________________________________
Amadeus forum mailing list
Unsubscribe / change settings at http://two.pairlist.net/mailman/listinfo/forum_list

luv4acting
Posts: 2
Joined: Wed Nov 04, 2009 5:13 pm

Post by luv4acting »

Got it!

Thank you so much, everything works great now.

killamike
Posts: 1
Joined: Fri Nov 06, 2009 11:04 am

yess!

Post by killamike »

yess! i was about to do a master today when the update prompt for 1.4.4 came, i updated and everything broke. AU units would either crash Amadeus outright or not do anything when applied. And VSTs were not previewing and when applied caused muted output.

Downloaded the zip (link still works for me but if you copy it adds a space between the / and A of ".com/ AmadeusPr.." and you need to delete it) and AU's back to normal! ;)

Thnks Martin for the prompt fix, saved the day.

Post Reply